Saltar al contenido principal

Cambios a Paso #4

Editado por robbieford2000

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] RemoveDetach the metal piece from where it is attached to the drivebody underneath the rubber pieces that were just removed.
[* black] The side of the piece that is closest to the door opening should now be loose. The whole piece should now needs to be slid farther into the drive through the slots.
[* black] Once you get the piece to the back of the slots the side that is still attached can be pried towards the center of the drive on each side to remove it from the slots on the door and hence the PSP
.
[* black] RemoveDetach the metal piece from where it is attached to the drivebody underneath the rubber pieces that were just removed.
[* black] The side of the piece that is closest to the door opening should now be loose. The whole piece should now needs to be slid farther into the drive through the slots.
[* black] Once you get the piece to the back of the slots the side that is still attached can be pried towards the center of the drive on each side to remove it from the slots on the door and hence the PSP
.