Saltar al contenido principal

Cambios a este Paso

Editado por mayer

Edicion aprobada por mayer

Antes
Después
Sin cambios

Líneas de Paso

[* black] Lay the bottom edge of the display glass against the top of the lower bezel. Be sure to align the edges of the display with the edges of the rear case.
[* icon_caution] ***Do not ***fully lower the display; there are still two cables that must be attached. Once you've set the display down, you won't be able to lift it again without damaging the adhesive.
+[* black] Old techs put the display on and test the repair before they glue it down.