Saltar al contenido principal

Cambios a este Paso

Editado por Sam Goldheart

Edicion aprobada por Sam Goldheart

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Peel up and remove the remaining backings from all of the strips around the frame.
+[* black] Lay the bottom edge of the display glass against the top of the lower bezel. Be sure to align the edges of the display with the edges of the rear case.
[* icon_caution] ***Do not ***fully lower the display; there are still two cables that must be attached. Once you've set the display down, you won't be able to lift it again without damaging the adhesive.