Saltar al contenido principal

Cambios a este Paso

Editado por Walter Galan

Edicion aprobada por Walter Galan

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Remove strip 04's left-hand backing and align it with the bottom left edge of the rear of the display, about a 1/4 inch away from the edge of the display glass.
-[* black] Remove the longer, right-hand, backing from strip 04 and smooth it out from the center to ensure a good seal with no bubbles or wrinkles.
+[* black] Remove the leftmost backing of the strip labeled 04 and align it with the bottom left edge of the rear enclosure, about a 1/4 inch away from the edge of the display glass.
+[* icon_note] Repeat the process for the longer, rightmost backing.
+[* black] Smooth out the strip from the center to ensure a good seal with no bubbles or wrinkles.