Saltar al contenido principal

Cambios a este Paso

Editado por Sam Goldheart

Edicion aprobada por Sam Goldheart

Sin cambios

Líneas de Paso

+[* icon_note] In some kits, the 04 strip may be split into a 4R, to be placed on the right half of the display, and a 4L to be placed on the left half.
[* black] Remove the leftmost backing of the strip labeled 04 and align it with the bottom left edge of the rear enclosure, about a 1/4 inch away from the edge of the display glass.
[* icon_note] Repeat the process for the longer, rightmost backing.
[* black] Smooth out the strip from the center to ensure a good seal with no bubbles or wrinkles.

Imagen 3

Ninguna imagen anterior