Saltar al contenido principal

Cambios a este Paso

Editado por Walter Galan

Edicion aprobada por Walter Galan

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Once you're satisfied that the bottom half of the adhesive strip is neatly aligned, peel the longer piece of backing out from behind the strip.
- [* icon_note] If the bottom half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top.
+[* black] Once you've aligned the bottom half of the adhesive strip, peel the longer piece of backing out from behind the strip.
+[* icon_note] If the bottom half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top.