Saltar al contenido principal

Cambios a este Paso

Editado por Sam Goldheart

Edicion aprobada por Sam Goldheart

Antes
Después
Sin cambios

Líneas de Paso

[* black] Once you're satisfied that the bottom half of the adhesive strip is neatly aligned, peel the longer piece of backing out from behind the strip.
-[* black] If the bottom half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top.
+ [* icon_note] If the bottom half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top.