Saltar al contenido principal

Cambios a este Paso

Editado por Walter Galan

Edicion aprobada por Walter Galan

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Before you start placing strips, remove all of the old adhesive. Use a spudger to scrape up an edge, then peel with your fingers.
-[* icon_note] Remove all of the remaining adhesive strips from the iMac's frame and display glass.
+[* icon_note] Before you start placing strips, it is recommended to remove all of the old adhesive around the perimeter of the rear enclosure.
+[* black] Use a spudger to scrape up an edge of the rear enclosure's perimeter, then peel with your fingers.
+[* icon_reminder] Repeat this process as necessary to remove all of the old adhesive adhered to the perimeter of the rear enclosure.