Cambios al paso #13
Líneas de Paso
| + | [title] Remove fans, heat sink and radio module |
|---|---|
| + | [* black] Remove radio module screw (red) and pull it out of connector. |
| + | [* black] Disconnect fans connectors and remove 6x screws. Pull fans out. |
| + | [* black] Remove 8 screws from heat sink and remove it. |
| + | [* black] Note: heat sink use thermal paste on CPU and GPU - you will need to clean and use new before putting it together. |
Imagen 1
Ninguna imagen anterior
Añadido