Saltar al contenido principal

Cambios a Paso #4

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the following screws from the front of the logic board:
[* red] Two 23.7 mm T10 screws.screws
[* orange] Four 7.4 mm T10 screws.screws
[* yellow] One 20.8 mm T25 spacer screw.screw
[* green] One captive T10 screw.screw
[* red] Two 23.7 mm T10 screws.screws
[* orange] Four 7.4 mm T10 screws.screws
[* yellow] One 20.8 mm T25 spacer screw.screw
[* green] One captive T10 screw.screw
[* icon_note] This screw is beneath a hole in the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kit to reach it.