Saltar al contenido principal

Cambios a Paso #4

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereRemove the following screws from the front of the logic board:
[* red] Two 23.7 mm T10 screws.
[* orange] Four 7.4 mm T10 screws.
[* yellow] One 20.8 mm T25 spacer screw.
[* green] One captive T10 screw.
[* icon_note] This screw is beneath the logic board, but accessible via a hole through the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kit
.
[* black] Insert wisdom hereRemove the following screws from the front of the logic board:
[* red] Two 23.7 mm T10 screws.
[* orange] Four 7.4 mm T10 screws.
[* yellow] One 20.8 mm T25 spacer screw.
[* green] One captive T10 screw.
[* icon_note] This screw is beneath the logic board, but accessible via a hole through the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kit
.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión