Saltar al contenido principal

Changes to Step #3

Editado por Darren Chan

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* icon_note] If you are not using a fuse resistor, skip this step. Otherwise, continue.
[* red] '''Insert and solder the new fuse resistor to F1 socket.''' The
[* icon_note] The fuse
resistor should be laid outsit on the top sidetopside of the circuit board and the leads should poke out frombe exposed on the underside. The orientationOrientation of the fuse resistor does not matter.matter
[* red] '''Insert and solder the new fuse resistor to F1 socket.''' The
[* icon_note] The fuse
resistor should be laid outsit on the top sidetopside of the circuit board and the leads should poke out frombe exposed on the underside. The orientationOrientation of the fuse resistor does not matter.matter
[* icon_note] The 10M 1/2 watt resistor in the picture is used to depict what a fuse resistor might look like.