Saltar al contenido principal

Changes to Step #3

Editado por Darren Chan

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] If you are not using a fuse resistor, skip this step. Otherwise, continue.
[* black] Insert and solder the new fuse resistor to F1 socket. The resistor should be laid out on the top side of the circuit board and the leads should poke out from underneaththe underside. The orientation of the resistor does not matter.
[* black] Insert and solder the new fuse resistor to F1 socket. The resistor should be laid out on the top side of the circuit board and the leads should poke out from underneaththe underside. The orientation of the resistor does not matter.