Skip to main content

Changes to Step #3

Editado por Darren Chan

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* black] If you are not using a fuse resistor, skip this step. Otherwise, continue.
[* black] Insert and solder the new fuse resistor to F1 socket. The resistor should be laid out on the top side of the circuit board and the leads should poke out from underneath. The orientation of the resistor does not matter.
[* black] Insert and solder the new fuse resistor to F1 socket. The resistor should be laid out on the top side of the circuit board and the leads should poke out from underneath. The orientation of the resistor does not matter.