Skip to main content

Changes to Step #2

Editado por Darren Chan

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* yellowblack] '''Remove the F1 fuse.''' Usingfuse''' by using the soldering iron and desoldering wick, remove the broken F1 fuse from the controller board.wick.
[* yellow]
The F1 fuse is located on the F1 slot of the circuit board. It is clearly indicated by an "F1" marking on the topside of the controller board.
[* yellowblack] '''Remove the F1 fuse.''' Usingfuse''' by using the soldering iron and desoldering wick, remove the broken F1 fuse from the controller board.wick.
[* yellow]
The F1 fuse is located on the F1 slot of the circuit board. It is clearly indicated by an "F1" marking on the topside of the controller board.
[* icon_note] If the F1 through-hole of the circuit board is not visible, you may clean the it by removing the excess solder by using the soldering iron and desoldering wick.