Skip to main content

Changes to Step #2

Editado por Darren Chan

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* black] Using the soldering iron and desoldering wick, remove the broken F1 fuse from the controller board. The F1 fuse is located on the F1 slot of the circuit board. It is clearly indicated by an "F1" marking on the topside of the board.
[* black] If the through holeF1 through-hole of the circuit board is not visible on the F1 slotvisible, you may clean the it by removing the excess solder by using the soldering iron and desoldering wick.
[* black] Using the soldering iron and desoldering wick, remove the broken F1 fuse from the controller board. The F1 fuse is located on the F1 slot of the circuit board. It is clearly indicated by an "F1" marking on the topside of the board.
[* black] If the through holeF1 through-hole of the circuit board is not visible on the F1 slotvisible, you may clean the it by removing the excess solder by using the soldering iron and desoldering wick.