Saltar al contenido principal

Changes to Step #2

Editado por Darren Chan

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* blackyellow] Using the soldering iron and desoldering wick, remove the broken F1 fuse from the controller board. The F1 fuse is located on the F1 slot of the circuit board. It is clearly indicated by an "F1" marking on the topside of the board.
[* blackicon_note] If the F1 through-hole of the circuit board is not visible, you may clean the it by removing the excess solder by using the soldering iron and desoldering wick.
[* blackyellow] Using the soldering iron and desoldering wick, remove the broken F1 fuse from the controller board. The F1 fuse is located on the F1 slot of the circuit board. It is clearly indicated by an "F1" marking on the topside of the board.
[* blackicon_note] If the F1 through-hole of the circuit board is not visible, you may clean the it by removing the excess solder by using the soldering iron and desoldering wick.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido