Saltar al contenido principal

Cambios al paso #1

Editado por Noobgamer0111

Edicion aprobada por Ennis

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Pry the coverings off the two upper screws.
+[* red] Pry the skate off the two upper screws.
[* black] Remove the two upper screws using a Phillips #00 screwdriver.
[* orange] Poke a hole with your screwdriver into the product sticker on the bottom of the mouse.
[* black] Remove the bottom screw using a Phillips #00 screwdriver.