Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #15

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Lift the logic board enough to gain clearance and use a spudger to pry the microphone up off the upper case.
[* black] Slide the logic board away from the port openings and Liftlift the assembly out of the upper case.
[* icon_reminder] Before reinstalling the logic board, it is easiest to press the microphone down into its housing in the left speaker to keep it in place.
[* black] Slide the logic board away from the port openings and Liftlift the assembly out of the upper case.
[* icon_reminder] Before reinstalling the logic board, it is easiest to press the microphone down into its housing in the left speaker to keep it in place.