Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] Apple sticks a small strip of clear plastic with adhesive applied to one side to the logic board behind the camera cable connector to keep it in its socket. When moving it out of the way, be sure not to break any surface-mount components off the logic board.
[*
black] UseHold the end of the cable retainer down with one finger while you use the tip of a spudger to removeslightly lift the protective shim up offother end and rotate it away from the logic boardcamera cable connector.
[* icon_caution] Apple sticks a small strip of clear plastic with adhesive applied to one side to the logic board behind the camera cable connector to keep it in its socket. When moving it out of the way, be sure not to break any surface-mount components off the logic board.
[*
black] UseHold the end of the cable retainer down with one finger while you use the tip of a spudger to removeslightly lift the protective shim up offother end and rotate it away from the logic boardcamera cable connector.