Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #5

Editado por Andrew Bookholt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove the two 8 mm Phillips screws securing the camera cable retainer to the upper case.
[* icon_note] One of the screws may remain captive in the camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[*
black] Insert wisdom hereLift the camera cable retainer out of the upper case.
[* red] Remove the two 8 mm Phillips screws securing the camera cable retainer to the upper case.
[* icon_note] One of the screws may remain captive in the camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[*
black] Insert wisdom hereLift the camera cable retainer out of the upper case.

Imagen 1

Versión Antigua

Nueva Versión