Cambios al paso #4
Editado por Clay Eickemeyer —
Edicion aprobada por Clay Eickemeyer
- Antes
- Después
- Sin cambios
Líneas de Paso
| [title] Remove the SSD standoff | |
| - | [* icon_note] The remaining steps describe how to install a full-size 80 mm SSD. If you are installing a short 30 mm SSD, you may stop here. |
| - | [* black] Use the flat end of your spudger to firmly push the metal screw standoff out of its bracket. |
| - | [* icon_note] Push in the direction of the small QR code on the standoff for removal. |
| - | [* icon_reminder] Note the orientation of the standoff. Keep the screw peg closest to the edge of the laptop during reassembly. |
| - | [* black] Lift the standoff out from the laptop with your fingers or a pair of blunt nose tweezers. |
| + | [* icon_note] If you are installing a full-size 80 mm SSD, follow the next four steps. |
| + | [* black] Use the flat end of a spudger to push the metal standoff bracket towards the center of the laptop and out of its slot. |
| + | [* black] Use a pair of blunt nose tweezers or your fingers to remove the bracket. |
| + | [* icon_reminder] During reassembly, slide in the bracket's standoff edge first into its slot. |