Saltar al contenido principal

Cambios al paso #7

Editado por Sam Gustafson

Edicion aprobada por Sam Gustafson

Antes
Después
Sin cambios

Líneas de Paso

[title] Prepare mirror motor assembly for install
[* red] Disengage this latch so the slide bar can move freely.
[* orange] Move the slide bar down about half way down its total travel.
[* black] Let the latch snap back into place so the slide bar is held in the new position.
-[* icon_note] This process is to ensure the aperture set lever spring couples properly with the slide bar during reassembly.
+[* icon_note] This ensures that the aperture set lever spring couples properly with the slide bar during reassembly.