Saltar al contenido principal

Cambios al paso #6

Editado por Sam Gustafson

Edicion aprobada por Sam Gustafson

Antes
Después
Sin cambios

Líneas de Paso

[title] Install green and yellow drive gears
[* red] When placing the gears, line up the two indicated holes. The gears must be in sync for the shutter and mirror to work properly.
[* black] Turn them back and forth a few degrees to make sure they are fully seated.
-[* orange] Aperture set lever spring. Note this part for assembly of the mirror motor assembly.
+[* orange] Aperture set lever spring. Note this part for installation of the mirror motor assembly.