Cambios a este Paso
Editado por Sam Gustafson —
Edicion aprobada por Sam Gustafson
- Antes
- Después
- Sin cambios
Líneas de Paso
[title] Remove flash PCB and capacitors | |
[* black] Gently peel the flex circuit from the surface of the capacitor. | |
[* black] There may be additional adhesive underneath the larger capacitor. | |
[* black] Lift the two capacitors and the flash PCB out as a single unit. | |
- | [* icon_note] The |
+ | [* icon_note] The contact cement used to secure the capacitors can be softened with isopropyl alcohol if necessary. |