Cambios a este Paso
Editado por Sam Gustafson —
Edicion aprobada por Sam Gustafson
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [title] Remove |
|---|---|
| - | [* black] Gently peel the flex |
| + | [title] Remove flash PCB and capacitors |
| + | [* black] Gently peel the flex circuit from the surface of the capacitor. |
| [* black] There may be additional adhesive underneath the larger capacitor. | |
| - | [* icon_note] The adhesive is most likely contact cement and can be softened with isopropyl alcohol if necessary. |
| + | [* black] Lift the two capacitors and the flash PCB out as a single unit. |
| + | [* icon_note] The contact cement used to secure the capacitors can be softened with isopropyl alcohol if necessary. |