Saltar al contenido principal

Cambios a este Paso

Editado por Sam Gustafson

Edicion aprobada por Sam Gustafson

Antes
Después
Sin cambios

Líneas de Paso

[title] Lift the flex circuit
-[* red] Begin gently prying the plastic carrier under the flex circuit. It may catch slightly on the battery contact tab.
+[* red] Gently pry up the plastic carrier under the flex circuit. It may catch slightly on the battery contact tab.
[* icon_note] Pay close attention to the connections around the four through-hole posts as you lift the flex. Make sure that no solder is left over and it pulls away freely.