Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #6

Editado por Alec

Edicion rechazada por Arthur Shi

Antes
Después
Sin cambios

Líneas de Paso

[* black] Lift the I/O board from the logic board side and pull it free from the upper case.
[* black] Removing the I/O board will also disconnect the microphone ribbon cable. Be careful not to snag it.
[* black] Underside of the i/o board (as viewed with case open/upside down) circled 'hall effect' sensor.

Imagen 2

Ninguna imagen anterior

Añadido