Saltar al contenido principal

Cambios al paso #3

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_caution] The following connector has an especially deep socket. Use care when disconnecting it.
[* black] While gently pulling the I/O board cable upward near its connection to the logic board, use the tipflat end of a spudger to pry up on alternating sides of the connector to help "walk" it out of its socket.
[* black] While gently pulling the I/O board cable upward near its connection to the logic board, use the tipflat end of a spudger to pry up on alternating sides of the connector to help "walk" it out of its socket.
[* black] Remove the I/O board cable.