Saltar al contenido principal

Cambios al paso #3

Editado por Walter Galan

Edicion aprobada por Walter Galan

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_caution] The following connector has an especially deep socket. Use care when disconnecting it.
[* black] While gently pulling the I/O board cable upward near its connection to the logic board, use the tip of a spudger to pry upwardup on alternating sides of the connector to help "walk" it out of its socket.
[* black] While gently pulling the I/O board cable upward near its connection to the logic board, use the tip of a spudger to pry upwardup on alternating sides of the connector to help "walk" it out of its socket.
[* black] Remove the I/O board cable.