Saltar al contenido principal

Cambios al paso #1

Editado por Finn Cole

Edicion aprobada por Finn Cole

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Disconnect the shown connectors and cables. The circled connectors can be disconnected by pulling on them horizontally, while the connector indicated by the square must be disconnected by lifting it upward from the board.
+[* black] Disconnect the shown connectors and cables.
+[* red] As indicated in the red circles, pull horizontally to remove the connectors.
+ [* red] As indicated in the red square, disconnect this piece by lifting upwards, away from the board.