Saltar al contenido principal

Cambios al paso #3

Editado por Connor

Edicion aprobada por Connor

Antes
Después
Sin cambios

Líneas de Paso

-[* icon_note] There is also an empty slot for a secondary SSD underneath this copper cover.
+[* icon_note] If you wish to install a second SSD, there is an empty slot for an additional SSD underneath the copper cover. If you're just replacing the existing SSD, stop here.
[* red] Use a Phillips #000 screwdriver to remove the one 3.0 mm screw on the left side of the SSD.
-[* black] Pull the cover out towards the left.
+[* black] Pull the cover out directly toward the left.