Saltar al contenido principal

Cambios a este Paso

Editado por Cade Caldwell

Edicion aprobada por Cade Caldwell

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Power off device before beginning disassembly
-[* black] Place the computer so the back panel is facing up.
-[* red] Begin by removing the 4 visible Torx T5 (3mm) on the sides and the two visible Torx T5 (9mm) near the hinges.
+[* red] Power off device before beginning disassembly
+[* orange] Place the computer so the back panel is facing up.
+[* yellow] Begin by removing the 4 visible Torx T5 (3mm) on the sides and the two visible Torx T5 (9mm) near the hinges.
[* icon_reminder] Keep track of all screws.