Saltar al contenido principal

Cambios a Paso #3

Editado por Christopher Cox

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] The optical drive is screwed down to a metal plate.
[*
black] Unscrew a total of twelve (12) Phillips #2 screws around the outer edge of the optical drive unit metal chassisplate.
[* icon_note] There are three (3) screws to the left of the metal plate.
[* icon_note] Four (4) screws around the back of the metal plate.
[* icon_note] Five (5) screws holding the right side of the metal plate to the Gamecube unit
.
[* icon_note] The optical drive is screwed down to a metal plate.
[*
black] Unscrew a total of twelve (12) Phillips #2 screws around the outer edge of the optical drive unit metal chassisplate.
[* icon_note] There are three (3) screws to the left of the metal plate.
[* icon_note] Four (4) screws around the back of the metal plate.
[* icon_note] Five (5) screws holding the right side of the metal plate to the Gamecube unit
.