Saltar al contenido principal

Changes to Step #1

Editado por BRUCE

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove the two Phillips #2 screws holding the fan assembly onto the unit.
[* green] Carefully unplug the tanfan connector with the red and black wires from the socket. Do not pull on the wires (as shown), but pull on the connector itself.
[* green] Carefully unplug the tanfan connector with the red and black wires from the socket. Do not pull on the wires (as shown), but pull on the connector itself.