Saltar al contenido principal

Changes to Step #1

Editado por bushing

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] UnscrewRemove the two Phillips #2 screws holding the fan assembly onto the unit using a Philips #2 screwdriverunit.
[* red] UnscrewRemove the two Phillips #2 screws holding the fan assembly onto the unit using a Philips #2 screwdriverunit.
[* green] Carefully unplug the tan connector from the socket. Do not pull on the wires (as shown), but pull on the connector itself.