Saltar al contenido principal

Changes to Step #1

Editado por Miroslav Djuric

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* red] Unscrew the two screws holding the fan assembly onto the unit using a Philips #2 screwdriver as shownscrewdriver.
[* red] Unscrew the two screws holding the fan assembly onto the unit using a Philips #2 screwdriver as shownscrewdriver.
[* green] Carefully unplug the tan connector from the socket. Do not pull on the wires (as shown), but pull on the connector itself.