Saltar al contenido principal

Changes to Step #1

Editado por Miroslav Djuric

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* red] Unscrew the two screws holding the fan assembly onto the unit using a Philips #2 screwdriver as shown.
[* green] Carefully remove the red and black wiring assembly from the fan unit by gently pullingunplug the tan connector away from the fan as shownsocket. Do not pull on the wires (as shown), but pull on the connector itself.
[* green] Carefully remove the red and black wiring assembly from the fan unit by gently pullingunplug the tan connector away from the fan as shownsocket. Do not pull on the wires (as shown), but pull on the connector itself.