Saltar al contenido principal

Changes to Step #1

Editado por dcarlin

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* red] Unscrew the two screws holding the fan assembly onto the unit using a Philips #2 screwdriver as shown.
[* green]
Carefully unclip controller ports inremove the red and black wiring assembly from the fan unit by gently pulling the front oftan connector away from the unitfan as shown.
[* red] Unscrew the two screws holding the fan assembly onto the unit using a Philips #2 screwdriver as shown.
[* green]
Carefully unclip controller ports inremove the red and black wiring assembly from the fan unit by gently pulling the front oftan connector away from the unitfan as shown.

Imagen 1

No hay imagen previa

Añadida

Imagen 2

No hay imagen previa

Añadida