Saltar al contenido principal

Changes to Step #1

Editado por Christopher Cox

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* black] On the left side of the unit you'll find the cooling fan and its housing. Remove the two (2) Phillips #2 screws holding the cooling fan housing onto the unit.
[* icon_note] Do not disassemble the cooling fan wire (red and black wire) from the main unit as it will not be necessary to do so.
[* black] On the left side of the unit you'll find the cooling fan and its housing. Remove the two (2) Phillips #2 screws holding the cooling fan housing onto the unit.
[* icon_note] Do not disassemble the cooling fan wire (red and black wire) from the main unit as it will not be necessary to do so.

Imagen 1

Versión antigua

Nueva versión

Imagen 2

Versión antigua

Nueva versión