Cambios al paso #1
Líneas de Paso
| - | [* red] Use the Phillips Head #0 Screwdriver to unscrew the two 3mm screws holding the tray in place. |
|---|---|
| - | [* black] Remove the RAM tray. |
| + | [* red] Use a Phillips #0 screwdriver to loosen the two 3 mm captive screws holding the tray in place. |
| + | [* icon_caution] The screws cannot be fully removed and only need to be loosened. Do not attempt to remove the screws from the tray. |
| + | [* black] Lift the RAM tray up and off. |