Saltar al contenido principal

Cambios a Paso #6

Editado por Mekenzie Griffin

Edicion aprobada por Evan Noronha

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Using tweezers, gently lift the microphone from its resting position to fully separate the device into two parts.
[* red] Finally, remove the screw that connects the motherboard to the back casing with a 3mm phillips head driver.
[* red] Finally, remove the screw that connects the motherboard to the back casing with a 3mm phillips head driver.