Saltar al contenido principal

Cambios a Paso #6

Editado por Matt West

Edicion aprobada por Matt West

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] GentlyUsing tweezers, gently lift the microphone from its resting position to fully separate the device into two parts.
[* icon_note] Use tweezers to lift the microphone component.
[* black] GentlyUsing tweezers, gently lift the microphone from its resting position to fully separate the device into two parts.
[* icon_note] Use tweezers to lift the microphone component.
[* yellow] Finally, remove screw that connects the motherboard to the back casing with a 3mm phillips head driver.