Saltar al contenido principal

Cambios a Paso #1

Editado por Mekenzie Griffin

Edicion aprobada por Evan Noronha

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Unscrew the two screws on the antenna unit using a torx-head screwdriver
[* icon_note] The Torx-Head Screws' size is T-5T-5, which is about 1.5mm.
[* icon_note] The Torx-Head Screws' size is T-5T-5, which is about 1.5mm.
[* black] Gently pry open the antenna unit with your fingers.
[* icon_caution] Be careful and try not to damage the small plastic tab.