Saltar al contenido principal

Cambios a Paso #1

Editado por Mekenzie Griffin

Edicion aprobada por Mekenzie Griffin

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Unscrew the two screws on the antenna unit using a torx-head screwdrivertorc-head screwdriver.
[* red] Unscrew the two screws on the antenna unit using a torx-head screwdrivertorc-head screwdriver.
[* icon_note] The Torx-Head Screws' size is T-5, which is about 1.5mm.
[* black] Gently pry open the antenna unit with your fingers.
[* icon_caution] Be careful and try not to damage the small plastic tab.

Imagen 1

Versión Antigua

Nueva Versión