Cambios al paso #4
Editado por Kristen Gismondi —
Edicion aprobada por Kristen Gismondi
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Remove the single (M2x3) screw that secures the WLAN bracket to the system board, and lift the WLAN bracket from the system board. |
|---|---|
| - | [* orange] After lifting the bracket, carefully unplug the antenna wire. |
| + | [* red] Remove the single 3 mm screw that secures the WLAN bracket to the system board using a Phillips #1 screwdriver. |
| + | [* black] Lift the WLAN bracket from the system board. |
| + | [* orange] After lifting the bracket, carefully unplug the two coaxial cables. |