Saltar al contenido principal

Cambios al paso #5

Editado por iRobot

Edicion aprobada por iRobot

Antes
Después
Sin cambios

Líneas de Paso

-[* yellow] Use a plastic card and try to scrape the sticker from the edges.
+[* yellow] Use a [product|IF145-101|plastic card] and try to scrape the sticker from the edges.
[* icon_note] A plastic card can help you remove your unwanted stickers without damaging the paint.
[* black] If it doesn't work, try to repeat step 4 and then try again.
[* icon_note] If you are working on a glass surface, use a razor blade instead of a plastic card! It may seem too much for the glass, but the glass is hard enough to use a razor blade on.
[* icon_caution] Be careful when using a razor blade!