Cambios al paso #4
Editado por Adam O'Camb —
Edicion aprobada por Adam O'Camb
- Antes
- Después
- Sin cambios
Líneas de Paso
| [title] Open a small gap | |
| [* black] Place the point of a spudger in the small hole on the side of the rear case. | |
| [* black] Use the spudger to push the rear case away from the housing to create a small gap. Use steady force to separate the two parts. | |
| - | [* icon_note] Steady the rear case with a finger to avoid it suddenly popping open and damaging the flex cable |
| + | [* icon_note] Steady the rear case with a finger to avoid it suddenly popping open and damaging the flex cable. |
| [* icon_caution] Don’t open the rear case all the way just yet. It is still connected to the motherboard with a thin flex cable. |