Saltar al contenido principal

Cambios a Paso #10

Editado por Walter Galan

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] During the glass removal process, the camera AirPort & iSight data cable may stick to the adhesive on the glass panel, disconnecting it from the camera board as the panel is lifted. If your cameraAirPort & iSight data cable is still connected to the camera board, skip this step.
[* icon_caution] If your objective is to remove the camera board, skip this step as reconnecting the AirPort & iSight data cable is not necessary.

[* black] To reconnect the cable, first use the tip of a spudger to remove the piece of foam tape over the cameraAirPort & iSight data cable ZIF socket.
[* black] Use the tip of a spudger to flip up the ZIF cable retainer on the cameraAirPort & iSight data cable socket.
[* black] Insert the cameraAirPort & iSight data cable into its socket on the camera board and use the tip of a spudger to snap down the ZIF cable retainer, locking the cable in place.
[* icon_reminder] Reapply the piece of tape covering the cameraAirPort & iSight data cable socket.
[* icon_note] During the glass removal process, the camera AirPort & iSight data cable may stick to the adhesive on the glass panel, disconnecting it from the camera board as the panel is lifted. If your cameraAirPort & iSight data cable is still connected to the camera board, skip this step.
[* icon_caution] If your objective is to remove the camera board, skip this step as reconnecting the AirPort & iSight data cable is not necessary.

[* black] To reconnect the cable, first use the tip of a spudger to remove the piece of foam tape over the cameraAirPort & iSight data cable ZIF socket.
[* black] Use the tip of a spudger to flip up the ZIF cable retainer on the cameraAirPort & iSight data cable socket.
[* black] Insert the cameraAirPort & iSight data cable into its socket on the camera board and use the tip of a spudger to snap down the ZIF cable retainer, locking the cable in place.
[* icon_reminder] Reapply the piece of tape covering the cameraAirPort & iSight data cable socket.