Saltar al contenido principal

Cambios a Paso #7

Editado por Andrew Bookholt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereUse a heat gun to soften the adhesive under the black strip along the left side of the front glass panel.
[* black] Attach a suction cup along the left side of the front glass panel.
[* black] Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly.
[* black] Continue working along the left edge of the front display glass until it is separated from the display
.
[* black] Insert wisdom hereUse a heat gun to soften the adhesive under the black strip along the left side of the front glass panel.
[* black] Attach a suction cup along the left side of the front glass panel.
[* black] Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly.
[* black] Continue working along the left edge of the front display glass until it is separated from the display
.